dmesg - 1 VM
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-17-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 (Ubuntu 3.0.0-17.30-generic 3.0.22)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb5a8000 (usable)
[ 0.000000] BIOS-e820: 00000000bb5a8000 - 00000000bb5f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb5f0000 - 00000000bb5fa000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb5fa000 - 00000000bb5fd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb5fd000 - 00000000bb621000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb621000 - 00000000bb62a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb62a000 - 00000000bb62d000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb62d000 - 00000000bb631000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb631000 - 00000000bb651000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb651000 - 00000000bb694000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb694000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bde00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Inspiron N4030/0R2XK8, BIOS A05 10/14/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[ 0.000000] reg 3, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 4, base: 4992MB, range: 128MB, type UC
[ 0.000000] total RAM covered: 3904M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 4, base: 4992MB, range: 128MB, type UC
[ 0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00fcda0] fcda0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 365ea000 - 372ed000
[ 0.000000] ACPI: RSDP 000f0410 00024 (v03 DELL )
[ 0.000000] ACPI: XSDT bb5f0088 0005C (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP bb5f96a0 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBB62DF40/0x00000000BB62DF80, using 32 (20110413/tbfadt-489)
[ 0.000000] ACPI: DSDT bb5f0170 0952F (v02 DELL WN09 00000030 INTL 20051117)
[ 0.000000] ACPI: FACS bb62df40 00040
[ 0.000000] ACPI: APIC bb5f9798 00072 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT bb5f9810 0014E (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG bb5f9960 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SLIC bb5f99a0 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET bb5f9b18 00038 (v01 DELL WN09 01072009 AMI. 00000003)
[ 0.000000] ACPI: OSFR bb5f9b50 0008C (v01 DELL M08 07DA0A0E ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2112MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bb800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bb5a8
[ 0.000000] 0: 0x000bb694 -> 0x000bb800
[ 0.000000] On node 0 totalpages: 767649
[ 0.000000] free_area_init_node: node 0, pgdat c17b54c0, node_mem_map f4e7a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4225 pages used for memmap
[ 0.000000] HighMem zone: 536213 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s26240 r0 d22912 u1048576
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 761648
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 12287744 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bb800)
[ 0.000000] Memory: 3010652k/3072000k available (5340k kernel code, 59944k reserved, 2595k data, 696k init, 2161752k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
[ 0.000000] .data : 0xc15371c4 - 0xc17c0140 (2595 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15371c4 (5340 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f380a000 soft=f380c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2526.877 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.75 BogoMIPS (lpj=10107508)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000025] Security Framework initialized
[ 0.000038] AppArmor: AppArmor initialized
[ 0.000040] Yama: becoming mindful.
[ 0.000090] Mount-cache hash table entries: 512
[ 0.000205] Initializing cgroup subsys cpuacct
[ 0.000210] Initializing cgroup subsys memory
[ 0.000218] Initializing cgroup subsys devices
[ 0.000220] Initializing cgroup subsys freezer
[ 0.000222] Initializing cgroup subsys net_cls
[ 0.000224] Initializing cgroup subsys blkio
[ 0.000229] Initializing cgroup subsys perf_event
[ 0.000258] CPU: Physical Processor ID: 0
[ 0.000259] CPU: Processor Core ID: 0
[ 0.000265] mce: CPU supports 9 MCE banks
[ 0.000278] CPU0: Thermal monitoring enabled (TM1)
[ 0.000286] using mwait in idle threads.
[ 0.002357] ACPI: Core revision 20110413
[ 0.018135] ftrace: allocating 24903 entries in 49 pages
[ 0.025851] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.026330] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065990] CPU0: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz stepping 05
[ 0.171348] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.171356] ... version: 3
[ 0.171357] ... bit width: 48
[ 0.171358] ... generic registers: 4
[ 0.171359] ... value mask: 0000ffffffffffff
[ 0.171361] ... max period: 000000007fffffff
[ 0.171362] ... fixed-purpose events: 3
[ 0.171363] ... event mask: 000000070000000f
[ 0.171747] CPU 1 irqstacks, hard=f38d2000 soft=f38d4000
[ 0.171749] Booting Node 0, Processors #1
[ 0.171752] smpboot cpu 1: start_ip = 99000
[ 0.181974] Initializing CPU#1
[ 0.279511] CPU 2 irqstacks, hard=f38de000 soft=f38e0000
[ 0.279514] #2
[ 0.279515] smpboot cpu 2: start_ip = 99000
[ 0.289662] Initializing CPU#2
[ 0.387421] CPU 3 irqstacks, hard=f38ec000 soft=f38ee000
[ 0.387423] #3 Ok.
[ 0.387424] smpboot cpu 3: start_ip = 99000
[ 0.397570] Initializing CPU#3
[ 0.495257] Brought up 4 CPUs
[ 0.495259] Total of 4 processors activated (20215.33 BogoMIPS).
[ 0.497597] devtmpfs: initialized
[ 0.497726] PM: Registering ACPI NVS region at bb5a8000 (294912 bytes)
[ 0.497734] PM: Registering ACPI NVS region at bb5fa000 (12288 bytes)
[ 0.497736] PM: Registering ACPI NVS region at bb621000 (36864 bytes)
[ 0.497738] PM: Registering ACPI NVS region at bb62d000 (16384 bytes)
[ 0.497740] PM: Registering ACPI NVS region at bb651000 (274432 bytes)
[ 0.499333] print_constraints: dummy:
[ 0.499362] Time: 14:22:32 Date: 04/02/12
[ 0.499397] NET: Registered protocol family 16
[ 0.499491] Trying to unpack rootfs image as initramfs...
[ 0.499492] EISA bus registered
[ 0.499500] ACPI: bus type pci registered
[ 0.499549] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.499552] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.499554] PCI: Using MMCONFIG for extended config space
[ 0.499555] PCI: Using configuration type 1 for base access
[ 0.500270] bio: create slab at 0
[ 0.501794] ACPI: EC: Look up EC in DSDT
[ 0.503277] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.508094] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.534427] ACPI: SSDT bb622c18 003A4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.534823] ACPI: Dynamic OEM Table Load:
[ 0.534825] ACPI: SSDT (null) 003A4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.535269] ACPI: Interpreter enabled
[ 0.535274] ACPI: (supports S0 S3 S4 S5)
[ 0.535294] ACPI: Using IOAPIC for interrupt routing
[ 0.535525] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.547588] ACPI: No dock devices found.
[ 0.547590] HEST: Table not found.
[ 0.547594] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.547712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.547800] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.547803] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.547805] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.547807] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.547818] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.547838] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.547859] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.547870] pci 0000:00:02.0: reg 10: [mem 0xfac00000-0xfaffffff 64bit]
[ 0.547876] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.547881] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087]
[ 0.547947] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.547977] pci 0000:00:16.0: reg 10: [mem 0xfbc09000-0xfbc0900f 64bit]
[ 0.548072] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.548077] pci 0000:00:16.0: PME# disabled
[ 0.548117] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.548142] pci 0000:00:1a.0: reg 10: [mem 0xfbc08000-0xfbc083ff]
[ 0.548252] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.548256] pci 0000:00:1a.0: PME# disabled
[ 0.548286] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.548307] pci 0000:00:1b.0: reg 10: [mem 0xfbc00000-0xfbc03fff 64bit]
[ 0.548405] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.548410] pci 0000:00:1b.0: PME# disabled
[ 0.548436] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.548537] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.548542] pci 0000:00:1c.0: PME# disabled
[ 0.548570] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.548670] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.548674] pci 0000:00:1c.1: PME# disabled
[ 0.548702] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 0.548801] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.548806] pci 0000:00:1c.2: PME# disabled
[ 0.548835] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.548935] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.548940] pci 0000:00:1c.4: PME# disabled
[ 0.548978] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.549003] pci 0000:00:1d.0: reg 10: [mem 0xfbc07000-0xfbc073ff]
[ 0.549113] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.549118] pci 0000:00:1d.0: PME# disabled
[ 0.549144] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.549231] pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601
[ 0.549363] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.549390] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.549401] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.549412] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.549423] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.549434] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.549445] pci 0000:00:1f.2: reg 24: [mem 0xfbc06000-0xfbc067ff]
[ 0.549512] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.549516] pci 0000:00:1f.2: PME# disabled
[ 0.549539] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.549560] pci 0000:00:1f.3: reg 10: [mem 0xfbc05000-0xfbc050ff 64bit]
[ 0.549590] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.549640] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.549667] pci 0000:00:1f.6: reg 10: [mem 0xfbc04000-0xfbc04fff 64bit]
[ 0.549821] pci 0000:00:1c.0: PCI bridge to [bus 11-11]
[ 0.549826] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.549832] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.549839] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.549926] pci 0000:12:00.0: [14e4:4727] type 0 class 0x000280
[ 0.549957] pci 0000:12:00.0: reg 10: [mem 0xfbb00000-0xfbb03fff 64bit]
[ 0.550121] pci 0000:12:00.0: supports D1 D2
[ 0.550123] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
[ 0.550129] pci 0000:12:00.0: PME# disabled
[ 0.555151] pci 0000:00:1c.1: PCI bridge to [bus 12-12]
[ 0.555155] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.555160] pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.555167] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.555248] pci 0000:13:00.0: [1969:2062] type 0 class 0x000200
[ 0.555277] pci 0000:13:00.0: reg 10: [mem 0xfba00000-0xfba3ffff 64bit]
[ 0.555293] pci 0000:13:00.0: reg 18: [io 0xe000-0xe07f]
[ 0.555418] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.555423] pci 0000:13:00.0: PME# disabled
[ 0.563141] pci 0000:00:1c.2: PCI bridge to [bus 13-13]
[ 0.563148] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.563152] pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.563159] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.563218] pci 0000:00:1c.4: PCI bridge to [bus 15-15]
[ 0.563223] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.563228] pci 0000:00:1c.4: bridge window [mem 0xfb000000-0xfb9fffff]
[ 0.563236] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.563310] pci 0000:00:1e.0: PCI bridge to [bus 20-20] (subtractive decode)
[ 0.563315] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.563319] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.563327] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.563329] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.563331] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.563333] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.563336] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.563367] pci_bus 0000:00: on NUMA node 0
[ 0.563373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.563567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.563646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.563678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.563709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.563742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.563868] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.564055] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.567303] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.567346] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.567386] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.567429] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.567470] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.567511] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.567552] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.567593] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.567671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.567678] vgaarb: loaded
[ 0.567679] vgaarb: bridge control possible 0000:00:02.0
[ 0.567852] SCSI subsystem initialized
[ 0.567913] libata version 3.00 loaded.
[ 0.567954] usbcore: registered new interface driver usbfs
[ 0.567963] usbcore: registered new interface driver hub
[ 0.567988] usbcore: registered new device driver usb
[ 0.568062] PCI: Using ACPI for IRQ routing
[ 0.577829] PCI: Discovered peer bus ff
[ 0.577868] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.577892] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.577912] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.577929] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.577947] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.577964] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.578104] PCI: pci_cache_line_size set to 64 bytes
[ 0.578193] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 0.578195] reserve RAM buffer: 00000000bb5a8000 - 00000000bbffffff
[ 0.578198] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[ 0.578287] NetLabel: Initializing
[ 0.578289] NetLabel: domain hash size = 128
[ 0.578290] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.578299] NetLabel: unlabeled traffic allowed by default
[ 0.578354] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.578360] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.580383] Switching to clocksource hpet
[ 0.583128] Switched to NOHz mode on CPU #0
[ 0.583212] Switched to NOHz mode on CPU #3
[ 0.583230] Switched to NOHz mode on CPU #2
[ 0.583257] Switched to NOHz mode on CPU #1
[ 0.586101] AppArmor: AppArmor Filesystem Enabled
[ 0.586128] pnp: PnP ACPI init
[ 0.586143] ACPI: bus type pnp registered
[ 0.586223] pnp 00:00: [bus 00-ff]
[ 0.586225] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.586227] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.586229] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.586231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.586233] pnp 00:00: [mem 0x00000000 window]
[ 0.586234] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.586304] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.586345] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.586347] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.586349] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.586350] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.586352] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.586394] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.586397] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.586399] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.586401] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.586403] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.586406] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.586429] pnp 00:02: [dma 4]
[ 0.586431] pnp 00:02: [io 0x0000-0x000f]
[ 0.586433] pnp 00:02: [io 0x0081-0x0083]
[ 0.586434] pnp 00:02: [io 0x0087]
[ 0.586436] pnp 00:02: [io 0x0089-0x008b]
[ 0.586437] pnp 00:02: [io 0x008f]
[ 0.586438] pnp 00:02: [io 0x00c0-0x00df]
[ 0.586460] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.586468] pnp 00:03: [io 0x0070-0x0071]
[ 0.586479] pnp 00:03: [irq 8]
[ 0.586499] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.586506] pnp 00:04: [io 0x0061]
[ 0.586525] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.586532] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.586537] pnp 00:05: [irq 13]
[ 0.586557] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.586571] pnp 00:06: [io 0x0010-0x001f]
[ 0.586573] pnp 00:06: [io 0x0022-0x003f]
[ 0.586574] pnp 00:06: [io 0x0044-0x005f]
[ 0.586576] pnp 00:06: [io 0x0068-0x006f]
[ 0.586578] pnp 00:06: [io 0x0072-0x007f]
[ 0.586580] pnp 00:06: [io 0x0080]
[ 0.586582] pnp 00:06: [io 0x0084-0x0086]
[ 0.586583] pnp 00:06: [io 0x0088]
[ 0.586585] pnp 00:06: [io 0x008c-0x008e]
[ 0.586586] pnp 00:06: [io 0x0090-0x009f]
[ 0.586588] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.586589] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.586591] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.586592] pnp 00:06: [mem 0xfe800000-0xfe8001ff]
[ 0.586630] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.586633] system 00:06: [mem 0xfe800000-0xfe8001ff] has been reserved
[ 0.586635] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.586651] pnp 00:07: [irq 12]
[ 0.586673] pnp 00:07: Plug and Play ACPI device, IDs DLL0466 SYN0600 SYN0002 PNP0f13 (active)
[ 0.586686] pnp 00:08: [io 0x0060]
[ 0.586687] pnp 00:08: [io 0x0064]
[ 0.586689] pnp 00:08: [io 0x0062]
[ 0.586690] pnp 00:08: [io 0x0066]
[ 0.586695] pnp 00:08: [irq 1]
[ 0.586716] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.586833] pnp 00:09: [io 0x0400-0x047f]
[ 0.586835] pnp 00:09: [io 0x1180-0x119f]
[ 0.586836] pnp 00:09: [io 0x0500-0x057f]
[ 0.586838] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.586840] pnp 00:09: [mem 0xfec00000-0xfecfffff]
[ 0.586841] pnp 00:09: [mem 0xfed08000-0xfed08fff]
[ 0.586843] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.586878] system 00:09: [io 0x0400-0x047f] has been reserved
[ 0.586881] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.586883] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.586885] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.586888] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.586890] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.586892] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.586895] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.586974] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.587008] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.587200] pnp: PnP ACPI: found 11 devices
[ 0.587202] ACPI: ACPI bus type pnp unregistered
[ 0.587205] PnPBIOS: Disabled by ACPI PNP
[ 0.622837] PCI: max bus depth: 1 pci_try_num: 2
[ 0.622897] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.622900] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0c00000-0xd0dfffff 64bit pref]
[ 0.622903] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.622905] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0e00000-0xd0ffffff]
[ 0.622908] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd1000000-0xd11fffff 64bit pref]
[ 0.622911] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.622913] pci 0000:00:1c.0: PCI bridge to [bus 11-11]
[ 0.622917] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.622923] pci 0000:00:1c.0: bridge window [mem 0xd0e00000-0xd0ffffff]
[ 0.622928] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd11fffff 64bit pref]
[ 0.622935] pci 0000:00:1c.1: PCI bridge to [bus 12-12]
[ 0.622938] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.622944] pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.622949] pci 0000:00:1c.1: bridge window [mem 0xd0c00000-0xd0dfffff 64bit pref]
[ 0.622957] pci 0000:00:1c.2: PCI bridge to [bus 13-13]
[ 0.622960] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.622967] pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.622971] pci 0000:00:1c.2: bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.622979] pci 0000:00:1c.4: PCI bridge to [bus 15-15]
[ 0.622982] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.622988] pci 0000:00:1c.4: bridge window [mem 0xfb000000-0xfb9fffff]
[ 0.622992] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.623000] pci 0000:00:1e.0: PCI bridge to [bus 20-20]
[ 0.623001] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.623007] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.623012] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.623040] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.623046] pci 0000:00:1c.0: setting latency timer to 64
[ 0.623057] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.623062] pci 0000:00:1c.1: setting latency timer to 64
[ 0.623073] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.623077] pci 0000:00:1c.2: setting latency timer to 64
[ 0.623085] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.623090] pci 0000:00:1c.4: setting latency timer to 64
[ 0.623098] pci 0000:00:1e.0: setting latency timer to 64
[ 0.623103] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.623105] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.623106] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.623108] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.623110] pci_bus 0000:11: resource 0 [io 0x3000-0x3fff]
[ 0.623112] pci_bus 0000:11: resource 1 [mem 0xd0e00000-0xd0ffffff]
[ 0.623114] pci_bus 0000:11: resource 2 [mem 0xd1000000-0xd11fffff 64bit pref]
[ 0.623116] pci_bus 0000:12: resource 0 [io 0x2000-0x2fff]
[ 0.623118] pci_bus 0000:12: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.623120] pci_bus 0000:12: resource 2 [mem 0xd0c00000-0xd0dfffff 64bit pref]
[ 0.623122] pci_bus 0000:13: resource 0 [io 0xe000-0xefff]
[ 0.623124] pci_bus 0000:13: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.623126] pci_bus 0000:13: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.623128] pci_bus 0000:15: resource 0 [io 0xd000-0xdfff]
[ 0.623129] pci_bus 0000:15: resource 1 [mem 0xfb000000-0xfb9fffff]
[ 0.623131] pci_bus 0000:15: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.623134] pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
[ 0.623135] pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
[ 0.623137] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.623139] pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.623141] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 0.623143] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffff]
[ 0.623180] NET: Registered protocol family 2
[ 0.623232] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.623396] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.623638] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.623748] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.623751] TCP reno registered
[ 0.623753] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.623758] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.623822] NET: Registered protocol family 1
[ 0.623833] pci 0000:00:02.0: Boot video device
[ 0.876475] PCI: CLS 64 bytes, default 64
[ 0.876916] audit: initializing netlink socket (disabled)
[ 0.876927] type=2000 audit(1333376551.708:1): initialized
[ 0.898385] highmem bounce pool size: 64 pages
[ 0.898391] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.906542] VFS: Disk quotas dquot_6.5.2
[ 0.906604] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.907166] fuse init (API version 7.16)
[ 0.907242] msgmni has been set to 1658
[ 0.907596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.907623] io scheduler noop registered
[ 0.907626] io scheduler deadline registered
[ 0.907639] io scheduler cfq registered (default)
[ 0.907747] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.907807] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.907887] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.907938] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.908016] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.908065] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.908143] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.908193] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.908275] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.908419] pciehp: Using ACPI for slot detection.
[ 0.908493] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 466
[ 0.908525] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.908530] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.908573] intel_idle: MWAIT substates: 0x1120
[ 0.908575] intel_idle: v0.4 model 0x25
[ 0.908576] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.908646] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.908683] ACPI: AC Adapter [AC] (on-line)
[ 0.908768] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.908774] ACPI: Power Button [PWRB]
[ 0.908808] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.910685] ACPI: Lid Switch [LID0]
[ 0.910717] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.910720] ACPI: Sleep Button [SBTN]
[ 0.910750] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.910753] ACPI: Power Button [PWRF]
[ 0.910776] ACPI: acpi_idle yielding to intel_idle
[ 0.924370] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.924390] ACPI: Thermal Zone [THM] (41 C)
[ 0.924421] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.924450] ERST: Table is not found!
[ 0.924696] isapnp: Scanning for PnP cards...
[ 0.936885] ACPI: Battery Slot [BAT0] (battery present)
[ 1.015596] Freeing initrd memory: 13324k freed
[ 1.278826] isapnp: No Plug & Play device found
[ 1.332519] Linux agpgart interface v0.103
[ 1.332604] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.332669] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.333445] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.333579] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.334535] brd: module loaded
[ 1.334968] loop: module loaded
[ 1.335341] Fixed MDIO Bus: probed
[ 1.335359] PPP generic driver version 2.4.2
[ 1.335388] tun: Universal TUN/TAP device driver, 1.6
[ 1.335389] tun: (C) 1999-2004 Max Krasnyansky
[ 1.335446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.335467] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.335484] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.335488] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.335519] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.335548] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.339514] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.339533] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbc08000
[ 1.352164] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.352298] hub 1-0:1.0: USB hub found
[ 1.352302] hub 1-0:1.0: 2 ports detected
[ 1.352365] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.352375] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.352378] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.352405] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.352430] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.356407] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.356422] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbc07000
[ 1.372150] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.372279] hub 2-0:1.0: USB hub found
[ 1.372282] hub 2-0:1.0: 2 ports detected
[ 1.372330] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.372340] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.372396] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 1.395284] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.395291] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.395385] mousedev: PS/2 mouse device common for all mice
[ 1.396358] rtc_cmos 00:03: RTC can wake from S4
[ 1.396454] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.396485] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.396554] device-mapper: uevent: version 1.0.3
[ 1.396612] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.396635] EISA: Probing bus 0 at eisa.0
[ 1.396637] EISA: Cannot allocate resource for mainboard
[ 1.396639] Cannot allocate resource for EISA slot 1
[ 1.396640] Cannot allocate resource for EISA slot 2
[ 1.396642] Cannot allocate resource for EISA slot 3
[ 1.396643] Cannot allocate resource for EISA slot 4
[ 1.396644] Cannot allocate resource for EISA slot 5
[ 1.396646] Cannot allocate resource for EISA slot 6
[ 1.396647] Cannot allocate resource for EISA slot 7
[ 1.396648] Cannot allocate resource for EISA slot 8
[ 1.396650] EISA: Detected 0 cards.
[ 1.396659] cpufreq-nforce2: No nForce2 chipset.
[ 1.396741] cpuidle: using governor ladder
[ 1.396871] cpuidle: using governor menu
[ 1.396873] EFI Variables Facility v0.08 2004-May-17
[ 1.397076] TCP cubic registered
[ 1.397183] NET: Registered protocol family 10
[ 1.397605] NET: Registered protocol family 17
[ 1.397618] Registering the dns_resolver key type
[ 1.397642] Using IPI No-Shortcut mode
[ 1.397705] PM: Hibernation image not present or could not be loaded.
[ 1.397714] registered taskstats version 1
[ 1.406842] Magic number: 8:443:383
[ 1.406853] usb usb1: hash matches
[ 1.406991] rtc_cmos 00:03: setting system clock to 2012-04-02 14:22:32 UTC (1333376552)
[ 1.408105] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.408139] EDD information not available.
[ 1.408323] Freeing unused kernel memory: 696k freed
[ 1.408496] Write protecting the kernel text: 5344k
[ 1.408571] Write protecting the kernel read-only data: 2192k
[ 1.426307] udevd[90]: starting version 173
[ 1.429164] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.455484] atl1c 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.455498] atl1c 0000:13:00.0: setting latency timer to 64
[ 1.467988] ahci 0000:00:1f.2: version 3.0
[ 1.468016] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.468094] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.468175] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.468179] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.468185] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.476848] scsi0 : ahci
[ 1.476988] scsi1 : ahci
[ 1.477065] scsi2 : ahci
[ 1.477148] scsi3 : ahci
[ 1.477230] scsi4 : ahci
[ 1.478163] scsi5 : ahci
[ 1.478347] ata1: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06100 irq 44
[ 1.478351] ata2: SATA max UDMA/133 abar m2048@0xfbc06000 port 0xfbc06180 irq 44
[ 1.478353] ata3: DUMMY
[ 1.478354] ata4: DUMMY
[ 1.478355] ata5: DUMMY
[ 1.478356] ata6: DUMMY
[ 1.580813] atl1c 0000:13:00.0: version 1.0.1.0-NAPI
[ 1.664059] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.796010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.796052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.796788] hub 1-1:1.0: USB hub found
[ 1.796912] hub 1-1:1.0: 6 ports detected
[ 1.797204] ata1.00: ATA-8: WDC WD3200BEVT-75A23T0, 01.01A01, max UDMA/133
[ 1.797209] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.798490] ata1.00: configured for UDMA/133
[ 1.798657] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 01.0 PQ: 0 ANSI: 5
[ 1.798780] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.798835] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.798937] sd 0:0:0:0: [sda] Write Protect is off
[ 1.798940] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.799015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.807351] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D100, max UDMA/100
[ 1.819975] ata2.00: configured for UDMA/100
[ 1.823313] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D100 PQ: 0 ANSI: 5
[ 1.830488] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.830493] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.830629] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.830671] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.875589] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.875878] Refined TSC clocksource calibration: 2526.994 MHz.
[ 1.875883] Switching to clocksource tsc
[ 1.876048] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.907975] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.040500] hub 2-1:1.0: USB hub found
[ 2.040671] hub 2-1:1.0: 8 ports detected
[ 2.112090] usb 1-1.3: new high speed USB device number 3 using ehci_hcd
[ 2.227940] usbcore: registered new interface driver uas
[ 2.228527] Initializing USB Mass Storage driver...
[ 2.228563] usbcore: registered new interface driver usb-storage
[ 2.228565] USB Mass Storage support registered.
[ 2.246622] scsi6 : usb-storage 1-1.3:1.0
[ 2.246719] usbcore: registered new interface driver ums-realtek
[ 2.303798] usb 1-1.4: new high speed USB device number 4 using ehci_hcd
[ 2.435353] usb 1-1.3: USB disconnect, device number 3
[ 3.034384] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 17.223729] udevd[330]: starting version 173
[ 17.264602] lp: driver loaded but no devices found
[ 17.272239] [drm] Initialized drm 1.1.0 20060810
[ 17.283231] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.284690] cfg80211: Calling CRDA to update world regulatory domain
[ 17.285077] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.285086] mei 0000:00:16.0: setting latency timer to 64
[ 17.293410] brcmutil: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.294286] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.297013] brcmsmac 0000:12:00.0: bus 18 slot 0 func 0 irq 5
[ 17.297053] brcmsmac 0000:12:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.297062] brcmsmac 0000:12:00.0: setting latency timer to 64
[ 17.297141] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.297146] i915 0000:00:02.0: setting latency timer to 64
[ 17.311609] wmi: Mapper loaded
[ 17.315526] Adding 3998716k swap on /dev/sda6. Priority:-1 extents:1 across:3998716k
[ 17.324514] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 17.324521] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.324523] [drm] Driver supports precise vblank timestamp query.
[ 17.324572] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.402734] type=1400 audit(1333387368.500:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=580 comm="apparmor_parser"
[ 17.403304] type=1400 audit(1333387368.504:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
[ 17.404435] type=1400 audit(1333387368.504:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
[ 17.435190] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.472654] device-mapper: multipath: version 1.3.0 loaded
[ 17.527042] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 17.550271] cfg80211: World regulatory domain updated:
[ 17.550275] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.550278] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.550282] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.550285] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.550287] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.550290] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.568880] Linux video capture interface: v2.00
[ 17.570920] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:6452)
[ 17.578124] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[ 17.578240] usbcore: registered new interface driver uvcvideo
[ 17.578243] USB Video Class driver (v1.1.0)
[ 17.604176] fbcon: inteldrmfb (fb0) is primary device
[ 17.604277] Console: switching to colour frame buffer device 170x48
[ 17.604308] fb0: inteldrmfb frame buffer device
[ 17.604310] drm: registered panic notifier
[ 17.615873] acpi device:2c: registered as cooling_device4
[ 17.616118] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 17.616150] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616154] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616156] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616160] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616162] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.616164] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616167] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616169] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616172] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616174] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616177] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616179] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616181] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616184] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616186] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616188] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616191] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616193] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616196] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616198] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616201] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616203] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616205] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616208] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616210] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616212] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616215] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616217] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 17.616220] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.616263] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.616292] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 17.616304] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 17.616346] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 17.616470] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 17.616513] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.616566] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 17.616596] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.619855] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.621081] cfg80211: Calling CRDA for country: US
[ 17.622256] lib80211: common routines for IEEE802.11 drivers
[ 17.622259] lib80211_crypt: registered algorithm 'NULL'
[ 17.625079] wl: module license 'MIXED/Proprietary' taints kernel.
[ 17.625084] Disabling lock debugging due to kernel taint
[ 17.630203] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630207] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630209] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630211] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630213] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630215] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630217] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630219] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630221] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630223] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630224] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630226] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630228] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630230] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630232] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630234] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630236] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630238] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630239] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630241] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630243] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.630245] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 17.630247] cfg80211: Disabling freq 2467 MHz
[ 17.630248] cfg80211: Disabling freq 2472 MHz
[ 17.630249] cfg80211: Disabling freq 2484 MHz
[ 17.630251] cfg80211: Regulatory domain changed to country: US
[ 17.630253] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.630255] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 17.630257] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 17.630259] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.630261] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.630263] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.630265] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 17.671994] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.672105] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.992914] alps.c: Enabled hardware quirk, falling back to psmouse-core
[ 18.019424] input: ImPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 18.159239] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr
[ 18.803306] ppdev: user-space parallel port driver
[ 18.811507] type=1400 audit(1333387369.912:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1002 comm="apparmor_parser"
[ 18.812070] type=1400 audit(1333387369.912:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1002 comm="apparmor_parser"
[ 18.916767] type=1400 audit(1333387370.016:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1016 comm="apparmor_parser"
[ 18.918003] type=1400 audit(1333387370.016:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1020 comm="apparmor_parser"
[ 18.918721] type=1400 audit(1333387370.020:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1017 comm="apparmor_parser"
[ 18.919206] type=1400 audit(1333387370.020:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1017 comm="apparmor_parser"
[ 18.919515] type=1400 audit(1333387370.020:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1017 comm="apparmor_parser"
[ 19.002411] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
[ 19.002416] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
[ 19.003043] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
[ 19.003259] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.005099] init: failsafe main process (939) killed by TERM signal
[ 19.006232] init: apport pre-start process (1057) terminated with status 1
[ 19.009834] atl1c 0000:13:00.0: irq 47 for MSI/MSI-X
[ 19.041213] init: apport post-stop process (1108) terminated with status 1
[ 19.091297] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.110877] Bridge firewalling registered
[ 19.120067] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.143046] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 19.156577] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 19.806523] vboxdrv: Found 4 processor cores.
[ 19.806805] vboxdrv: fAsync=0 offMin=0x2ac offMax=0x20f4
[ 19.806871] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 19.806874] vboxdrv: Successfully loaded version 4.1.10 (interface 0x00190000).
[ 20.014605] vboxpci: IOMMU not found (not registered)
[ 20.098408] Bluetooth: Core ver 2.16
[ 20.098435] NET: Registered protocol family 31
[ 20.098437] Bluetooth: HCI device and connection manager initialized
[ 20.098440] Bluetooth: HCI socket layer initialized
[ 20.098442] Bluetooth: L2CAP socket layer initialized
[ 20.098484] Bluetooth: SCO socket layer initialized
[ 20.100919] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.100923] Bluetooth: BNEP filters: protocol multicast
[ 20.101451] Bluetooth: RFCOMM TTY layer initialized
[ 20.101455] Bluetooth: RFCOMM socket layer initialized
[ 20.101457] Bluetooth: RFCOMM ver 1.11
[ 21.154996] wlan0: authenticate with f4:ec:38:d2:7a:14 (try 1)
[ 21.156742] wlan0: authenticated
[ 21.157063] wlan0: associate with f4:ec:38:d2:7a:14 (try 1)
[ 21.161565] wlan0: RX AssocResp from f4:ec:38:d2:7a:14 (capab=0x431 status=0 aid=1)
[ 21.161568] wlan0: associated
[ 21.162120] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: true (implement)
[ 21.162131] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[ 21.162149] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 21.162342] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.442109] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 22.502995] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 32.235086] wlan0: no IPv6 routers present
[ 34.325850] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 35.142729] init: plymouth-stop pre-start process (1742) terminated with status 1
[ 4202.747777] audit_printk_skb: 33 callbacks suppressed
[ 4202.747780] type=1400 audit(1333391556.632:23): apparmor="STATUS" operation="profile_load" name="libvirt-572d9a4f-74e9-d098-58f8-419b5141e9df" pid=3455 comm="apparmor_parser"
[ 4203.085626] device vnet0 entered promiscuous mode
[ 4203.086867] virbr0: topology change detected, propagating
[ 4203.086878] virbr0: port 1(vnet0) entering forwarding state
[ 4203.086892] virbr0: port 1(vnet0) entering forwarding state
[ 4203.087302] ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready
[ 4213.316951] vnet0: no IPv6 routers present
[ 5713.375257] ieee80211 phy0: wlc_sendampdu: No fifo space !!
[ 5713.375592] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.375806] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.376137] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.376526] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.376916] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.377487] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.377858] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.378254] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.378662] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.379032] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.379217] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379237] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379249] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379266] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379285] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379298] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379312] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379327] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379340] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379356] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379430] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.379570] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379589] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379602] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379613] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379625] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379636] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379648] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379661] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379673] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379685] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379696] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379708] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379723] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379738] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379750] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379762] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.379834] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.379988] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380004] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380017] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380029] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380044] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380059] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380072] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380086] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380099] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380112] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380124] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380137] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380150] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380163] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380232] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.380375] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380390] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380404] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380415] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380427] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380440] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380453] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380466] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380478] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380490] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380505] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380517] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380533] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380604] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.380750] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380766] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380780] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380796] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380808] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380820] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380834] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380855] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380883] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380899] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380912] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.380925] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381004] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.381130] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381145] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381165] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381182] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381195] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381229] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381240] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381249] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381259] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381268] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381278] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381291] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381315] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381374] ieee80211 phy0: wlc_sendampdu: No fifo space !!
[ 5713.381380] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.381478] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381488] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381498] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381508] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381518] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381527] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381536] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381544] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381554] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381564] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381573] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381585] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381595] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381606] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381616] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381632] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381646] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381659] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381671] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381681] ieee80211 phy0: wlc_prec_enq_head: No where to go, prec == 4
[ 5713.381755] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.382162] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.382567] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.382942] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.383337] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.383738] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.384101] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.384504] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.384905] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.385308] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.385687] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.386080] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.386474] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5713.386849] ieee80211 phy0: wl0: wlc_sendampdu: prep_xdu retry; seq 0x0
[ 5724.095097] wlan0: deauthenticated from f4:ec:38:d2:7a:14 (Reason: 6)
[ 5724.127812] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
[ 5724.127837] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: disassociated
[ 5724.127847] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 5724.263349] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5724.263363] cfg80211: Restoring regulatory settings
[ 5724.263371] cfg80211: Calling CRDA to update world regulatory domain
[ 5724.270088] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270096] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270098] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270101] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270104] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270107] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270109] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270111] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270113] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270116] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270118] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270121] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270123] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270126] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270128] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270131] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270133] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270135] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270138] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270140] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270142] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 5724.270145] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 5724.270147] cfg80211: Disabling freq 2467 MHz
[ 5724.270148] cfg80211: Disabling freq 2472 MHz
[ 5724.270150] cfg80211: Disabling freq 2484 MHz
[ 5724.270153] cfg80211: World regulatory domain updated:
[ 5724.270156] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5724.270158] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5724.270161] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5724.270163] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5724.270166] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5724.270168] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5730.633768] wlan0: authenticate with f4:ec:38:d2:7a:14 (try 1)
[ 5730.635579] wlan0: authenticated
[ 5730.636044] wlan0: associate with f4:ec:38:d2:7a:14 (try 1)
[ 5730.639955] wlan0: RX ReassocResp from f4:ec:38:d2:7a:14 (capab=0x431 status=0 aid=1)
[ 5730.639967] wlan0: associated
[ 5730.640573] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: true (implement)
[ 5730.640602] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[ 5730.640624] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 6438.157534] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 6438.158496] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 6640.082012] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
[ 6640.082022] atkbd serio0: Use 'setkeycodes e00d ' to make it known.
[ 6642.207944] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
[ 6642.207955] atkbd serio0: Use 'setkeycodes e00d ' to make it known.